ADVANCED ETFE COATING: Features a reinforced fibreglass base and a textured ETFE surface that is highly resistant to salt water, UV degradation, and cracking, ensuring a significantly longer service life than standard PET panels.

Key Features

• ✔ 9-Busbar Technology: Enhanced efficiency and better performance in low-light conditions.
• ✔ Flush Mounting: Rear junction box eliminates unsightly cables on the panel surface.
• ✔ Salt-Water Resistant: Perfect for marine applications and coastal environments.
• ✔ Highly Flexible: Conforms to curved surfaces (up to 225mm arch height).
• ✔ Lightweight Design: Only 3.65kg – ideal for weight-sensitive pop-up roofs.

Technical Specs

Peak Power (Pmax)	200W
Max Power Voltage (Vmp)	17.6V
Max Power Current (Imp)	11.36A
Open Circuit Voltage (Voc)	23.8V
Short Circuit Current (Isc)	12.05A
Dimensions (L x W x D)	1390 x 710 x 2 mm
Weight	3.65 kg
Cable Length	3m (4.0mm²)

Application	System Type	Notes
Motorhomes & RVs	12V Battery Systems	Ideal for curved roofs & pop-ups.
Marine / Yachts	Boats & Narrowboats	Salt-water resistant ETFE coating.
Off-Grid Kits	Solar Lighting / Backup	Discrete black aesthetic for dark roofs.

This panel features a rear-mounted circular junction box (approx. 30mm diameter). For a completely flush mount, a small recess must be cut into the mounting surface. Bonding with a high-quality marine-grade adhesive (such as Sikaflex) is the recommended method of fitment. Note: This panel must be used with a suitable PWM or MPPT solar charge controller and should not be connected directly to a battery.

Is this a genuine solarika / Aftermarket part?

Yes, this is a premium quality aftermarket replacement part, manufactured to meet or exceed original equipment (OE) standards for durability and electrical output.

Why does it have a rear-mounted junction box?

The rear junction box allows for a completely smooth, level surface. This prevents trip hazards on boat decks and improves the aerodynamics and aesthetics on vehicle roofs by hiding the wiring underneath the panel.

Can I walk on this solar panel?

While the ETFE surface and fibreglass reinforcement provide incredible durability, semi-flexible panels are not designed for regular foot traffic. Occasional light pressure with soft-soled shoes during maintenance is generally acceptable if the panel is fully bonded to a flat, solid surface.