UNMATCHED DURABILITY: Built without glass or fragile silicon cells, this panel can withstand mechanical stress, impacts, and is fully walkable when properly installed on a solid surface.

Key Features

• ✔ Ultra-Thin & Lightweight: Only 2mm thick and weighing just 3.0kg.
• ✔ Superior Shading: Integrated bypass diodes between every cell for high yield in partial shade.
• ✔ Peel & Stick: Integrated high-strength self-adhesive backing for rapid installation.
• ✔ Eco-Friendly: 90% lower carbon footprint than standard crystalline panels.

Technical Specs

Peak Power (Pmax)	125W
Max Power Voltage (Vmpp)	18.9V
Max Power Current (Impp)	6.6A
Open Circuit Voltage (Voc)	22.9V
Short Circuit Current (Isc)	7.6A
Dimensions	3077 x 358 x 2mm
Weight	3.0kg

System Type	Surface Material	Notes
Marine / Yacht	GRP, Carbon Fiber, Metal	Saltwater resistant, walkable on deck.
Camper / Van	Curved Roofs, Ribbed Roofs	Contours to curves; minimal wind drag.
Off-Grid Industrial	Bitumen, Roofing Felt, TPO	No mounting rails required.

1. Ensure the mounting surface is clean, dry, and free of grease using an alcohol-based cleaner.
2. Test position the panel before removing the adhesive backing.
3. Carefully peel the backing and apply pressure from the center outwards to eliminate air bubbles.
4. Use a suitable MPPT charge controller (10A+ recommended) for optimal performance. Note: This panel is supplied without cables; MC4 compatible solar cables are required.

Is this panel truly walkable?

Yes. Because CIGS technology does not use brittle silicon cells, the panel is shatterproof and can be walked on when installed on a smooth, solid surface. This makes it ideal for yacht decks and motorhome roofs.

How does it perform in the shade?

This panel features exceptional shading tolerance. With bypass diodes integrated between every single cell, shading on one part of the panel only affects that specific area, rather than cutting the power of the entire string.

Does it require a mounting frame?

No. It comes with a high-bond self-adhesive backing designed for permanent installation directly onto the surface, saving weight and reducing the height profile to just 2mm.