180W black semi-flexible fibreglass solar panel with round rear junction box and 3m cable, with durable ETFE coating
180W black semi-flexible fibreglass solar panel with round rear junction box and 3m cable, with durable ETFE coating
SKU:FLAXBJB-180M
Our stock levels are dynamic and can change frequently. If a product appears to be in stock, it may have already sold out. Please contact us if you have any questions about availability. Thank you for your understanding.
Couldn't load pickup availability
180W SEMI-FLEXIBLE SOLAR PANEL [FLAXBJB-180M]
Premium ETFE Coating & Rear Junction Box for Flush Mounting
The FLAXBJB-180M is a high-performance 180W monocrystalline solar panel designed specifically for demanding mobile and marine environments. Featuring a unique rear-mounted junction box, this panel allows for a completely flush installation, eliminating trip hazards and reducing wind drag on vehicle roofs. The fiberglass reinforcement combined with a rugged ETFE top layer provides superior durability and resistance to salt water, making it the professional choice for yachts, campervans, and off-grid systems.
Key Features
- ✔ Rear Junction Box: Creates a seamless, level surface.
- ✔ Semi-Flexible: Conforms to curved surfaces (up to 250mm arch).
- ✔ ETFE Coating: Salt-water resistant and anti-reflective.
- ✔ Ultra-Thin: Only 3mm profile for low aerodynamic impact.
- ✔ Pre-Wired: Includes 3m of 4mm² dual-core solar cable.
Technical Specs
| Peak Power: | 180W |
| Max Power Voltage (Vmp): | 20.5V |
| Max Power Current (Imp): | 8.79A |
| Open Circuit Voltage (Voc): | 24.0V |
| Short Circuit Current (Isc): | 9.22A |
| Dimensions: | 1470 x 665 x 3 mm |
| Weight: | 3.15 kg |
Application & Fitment Guide
| System / Use Case | Application | Notes |
|---|---|---|
| Marine / Nautical | Boats, Yachts, Narrowboats | ETFE coating resists salt corrosion. |
| Leisure Vehicles | Motorhomes, Caravans, VW Transporters | Aerodynamic flush mount via rear J-Box. |
| Off-Grid Power | Remote Lighting, Backup Systems | Requires 12V Solar Charge Controller. |
Installation Notes
Flush Mounting: To achieve a perfectly level finish, a small recess/hole must be cut into the mounting surface to accommodate the circular rear-mounted junction box (approx. 30mm diameter).
Bonding: We recommend using a high-quality structural adhesive (such as Sikaflex 252 or 512) for permanent bonding to vehicle roofs or boat decks.
Questions & Answers
Is this a genuine solarika / Aftermarket part?
This is a premium quality aftermarket solar panel sourced to meet the high technical standards required by solarika for mobile and marine power applications.
Do I need a charge controller for this panel?
Yes. This panel must be used with a suitable solar charge controller (PWM or MPPT) to regulate the voltage before it reaches your 12V battery bank. It should not be connected directly to a battery.
Can I walk on this solar panel?
While the panel is reinforced with fiberglass and ETFE for durability, we recommend avoiding high-traffic areas. Occasional light treading with soft-soled deck shoes is generally acceptable if the panel is fully bonded to a flat, solid surface.
Note: Please verify measurements (1470 x 665mm) and your mounting space before purchasing. Professional installation is recommended for marine and vehicle roof bonding. Visit solarika.co.uk for technical support.
Share
